All Listings > 

1-10 | 11-17
sort by: best match | lowest to highest | highest to lowest
Used National Machine Listings
 
SCMI - 22S-4 4 HEAD MOULDER
Print Item
List Price: $8,950.00
Condition: ATFS
Machine Stock Number: G-2-157
Member Stock Number: MD160009811
Serial Number: 71947
DD: C

Description:
- Price Reduced! -
Video available

Specifications-
3 Phase, 480V
Serial Number: 71947
Feed Wheels have been upgraded to a variable speed drive.
All spindle have had the bearings replaced in the last 6 months
4 Head (B-R-L-T ) working capacity 8-5/8” x 4-11/16”
Head Sequence Bottom 9 HP motor, right/left 12HP motor and Top 12 HP motor
Sound insulation hood and dust hoods.
Back panel in not shown in the pictures but it is included
Manuals are included

Parts included:

16 High Speed Spindle Belts
2 30MM Love Joy Couplings w/ 7 Bushings
8 50MM Drive Wheels
3 20MM Drive Wheels
2 45MM Polyurathane Wheels
2 20MM Polyurathane Wheels
2 Hand Cranks
12 Insurock Chip Guides
4 Adjusting Lugs
2 Threaded Pins
4 Bearing Caps
Click for Large Image

 
UNKNOWN - N/A CART
Print Item
List Price: $750.00
Condition: CLEANED/CHECKED
Machine Stock Number: 1057
Member Stock Number: MD260005795
Serial Number:
DD: D

Description:
1-EA. MOBILE TOOL CART. WITH POSITIONS FOR 18 TOOLS. ON CASTERS.
Click for Large Image

 
MISCELLANEOUS - 11-head HARBS MOULDER
Print Item
 
List Price: $2,750.00
Condition: AS IS
Machine Stock Number: G-2-151
Member Stock Number: MD160007976
Serial Number:
DD: C

Description:
As Is Condition - One spindle/motor missing, 11 head

8.5" x 5.5" capacity, (10) 10HP motors, (1) 5.4HP Feed motor

The machine condition is good for its age.



It’s a workhorse and has 11 stations



Some parts are missing from the stations not currently used by the seller, such as belts and a motor.


Seller still has the motor or motors, but they might need to be rewound.



The dimensions are 27 feet long x 53” wide (at the widest point) x 68” high (at the highest point).


There is a separate electrical enclosure that is 50” W x 13” D x 44” H.

It could weigh 5 tons or more. There is al lot of cast iron in it and some large spindles and motors.
Click for Large Image

 
MISCELLANEOUS - HYRDOLOCK HEADS HYDROLOCK MOULDER HEADS
Print Item
List Price: $2,950.00
Condition: CLEANED/CHECKED
Machine Stock Number: 1680
Member Stock Number: MD260011049
Serial Number:
DD: D

Description:
1-lot of used hydrolock moulder heads. For 2-1/8" spindles. With three (3) 9" heads, three (3) 6" heads, four (4) 4" heads, and five (5) 3" heads.

 
EKSTROM/CARLSON - 464 MOULDER
Print Item
List Price: $8,500.00
Condition: CLEANED/CHECKED
Machine Stock Number: D8510
Member Stock Number: MD050000771
Serial Number: 13668
DD: D

Description:
Ekstrom / Carlson Moulder
Model 464
Capacity 4" x 6"
Connected 220 V
3 Phase
60 Cy
7.5 HP Top; 5 HP Left Side; 5 HP Right Side; 7.5 HP Bottom
5 HP Reeves Drive Feed
Reference # D-8510
Click for Large Image

 
MATTISON - 276 MOULDER
Print Item
List Price: $14,500.00
Condition: CLEANED/CHECKED
Machine Stock Number: D-8846
Member Stock Number: MD050000773
Serial Number: 21907
DD: D

Description:
4 Head

4" X 6" Capacity

Head sequence: Top 10 HP; left 7.5 HP, right 7.5 HP, and bottom 10 HP

Feed speed 7.5 HP

With hopper

Connected 220 V

3 Phase, 60 Cycle
Click for Large Image

 
WEINIG - H23C MOULDER
Print Item
List Price: $39,000.00
Condition: AS IS
Machine Stock Number: 615102
Member Stock Number: MD060004702
Serial Number: 023-1740
DD: A
Machine ID: E73.725

Description:
Hydromat 23C 5 spindle 120 feet per minute feed speed. 2 1/8" spindles, 440 volt 10hp feed, bottom 15hp, right 15hp, left 15hp, top 25hp, bottom 20hp.
MSL lateral chain infeed table 12' long 10 HP Hydralic drive S/N 272.lcf.12
Click for Large Image

 
FOLEY-UNITED - 65 PROFILE KNIFE GRINDER
Print Item
 
List Price: $2,875.00
Condition: CLEANED/CHECKED
Machine Stock Number: T-1-017
Member Stock Number: MD160009150
Serial Number:
DD: C

Description:
-Foley 65 Profile / Knife Grinder

-Cleaned and checked

-3/4 HP, 3Ph motor (1725/1425 RPM) 220V

-8" Wheel capacity with on board wheel dressing

-9” Table movement

-.001” Micro Control template table adjustment

-.0001” Micro Control Stylus adjustment

-12” Maximum Cutting Circle by 9” Wide

-1 1/8” Tooling Arbor

-Grinder rotates from 0-15 degrees for side clearance

-10-30 degrees movement for back relief

-5 Gallon recirculating coolant tank with 110V, 1.7Amp pump and separate control switch

-Approx. 200 Gallons/hr coolant dispersement capacity

-8” Maximum grinding wheel capacity, Approx. 7” minimum cap.

-Grinding wheel width capacities, 1/16”, 1/8”, 3/16”, Ό”

-Grinding wheel arbor size 1 Ό”

-Can grind carbide and all tool steel
Click for Large Image

 
SCM - Superset XL-5 Elite SCM SUPERSET XL MOULDER
Print Item
2006
List Price: $65,000.00
Condition: LIKE NEW
Machine Stock Number: SUPERSETXL
Member Stock Number: MD070008946
Serial Number: AB175591
DD: C

Description:
SCM Superset XL (Elite) Moulder.composition 5; feed = inverter drive, 6.6 HP; position 1 = planer spindle 12 HP; position 2 = right vertical spindle 9 HP; position 3 = left vertical spindle 9 HP; position 4 = top horizontal spindle 18 HP; position 5 = bottom horizontal spindle 12 HP; working width min/max = 15mm/230mm; working thickness; min/max. = 6 mm/120mm; electro mechanical spindle brakes on spindles 1-5; 1-13/16" dia. spindles to all positions; pneumatic exclusion from control panel of feed unit placed before planer spindle; side pressure roller placed before planer with pneumatic exclusion from main control panel; front pneumatic receding chipbreaker before top horizontal spindle; kit to reduce working width from 25 mm to 15 mm; two sector split pressure shoe after top horizontal spindle position with 40 mm stroke; flanged feed roller opposite left vertical spindle with 50 mm stroke; manual table lubrication pump for worktable located on the infeed table for the operatior; manual centralized lubrication points fro the front side of the machine, color-coded for production maintenance schedule; inside illumination of safety enclosure; top steel feed rollers before the top spindle are separately adjustable from the outfeed roller; table inserts by vertical spindles; worktable with hardened insert placed before planer; (1) idle pressure roller in front of right vertical spindle and (2) in front of universal spindle; (2) feed rollers 140 x 25 mm for each feed hub; working tools for machine adjustments.

 
STETSON ROSS - 626 4 head STETSON ROSS MODEL 626 4 HEAD MOULDER AND TOOLING
Print Item
1970
List Price: $8,000.00
Condition: ATFS
Machine Stock Number: 11250
Member Stock Number: MD070008803
Serial Number:
DD: D

Description:
Used Stetson Ross, Model 626 4 Head Moulder. 6" wide x 2" high x 4 heads, 10 HP motor for top & bottom spindles, 5 HP for side heads, 1.5 HP feed motor, spindles 6000 RPM belt driven, l-1/14" spindle diameter, (4) powered feed rolls, (2-top, corrugated & 2-bottom, smooth) β€’ 1970, Model 626, 4 Head Moulder, W/(2) Corugated 6” Cutter Heads & (2) 2” Cutter Heads on Machine, (1) Additonal 6” – 4 Pocket Cutter Head – (Corugated/Straight Knife Head) β€’ Approximately 160-170 Sets of Straight & Corugated Back Moulder Tooling in Labeled Plastic Drawers. β€’ Unpainted Large Belt Guard & Small Misc. Cutterhead Guards, Original Bed Plates.
Click for Large Image

Displaying listings 1 - 10 of 17 possible listings.
1-10 | 11-17