All Listings > 

1-10 | 11-20 | 21-23
sort by: best match | lowest to highest | highest to lowest
Used National Machine Listings
 
INVICTA - RS15 INVICTA DELTA
Print Item
List Price: $3,695.00
Condition: CLEANED/CHECKED
Machine Stock Number: 1779
Member Stock Number: SH260011399
Serial Number:
DD: D

Description:
1-used INVICTA DELTA SHAPER model RS15. With a table size of 43 x 36 in. With a 1-1/4" spindle size. With a 7.5 HP motor. For operation on 230/60/1. Cleaned and checked.
Click for Large Image

 
WHITNEY - 39A DOUBLE SPINDLE SHAPER
Print Item
List Price: $4,350.00
Condition: CLEANED/CHECKED
Machine Stock Number: 50008
Member Stock Number: SH050000812
Serial Number: NA
DD: D

Description:
3 HP on each spindle belt drive

Spindles 30" on center

1 3/8" spindles

Table size 66" x 42"

Connected 440 V.
Click for Large Image

 
WHITNEY - 293 AUTOMATIC SPINDLE SHAPER
Print Item
List Price: $4,500.00
Condition: AS IS
Machine Stock Number: A-738
Member Stock Number: SH050000810
Serial Number: 14538-R
DD: D

Description:
Power……………………………………………....7 ½ HP

Electrical-Volts………………………………….220/3/120

Single fixed spindle…………………………. 1 Ό inches diameter

Front of table to center of spindle….28 inches

Table size……………………………………….….56 inches x 47 inches

No tooling included.
Click for Large Image

 
GREENLEE - 180-B DOUBLE SPINDLE SHAPER
Print Item
List Price: $4,750.00
Condition: ATFS
Machine Stock Number: D-8871
Member Stock Number: SH050008144
Serial Number:
DD: D

Description:
Number of Spindles.............2@ 1 1/4" diameter
Size of Table.....................66"x42"
Distance Between Spindle Centers..............30"
Spindle Carriage Vertical Adjustment, Regularly.....4 1/2"
HP per Spindle....................5
Net Weight........................3700
Click for Large Image

 
SCM - T-110 SHAPER
Print Item
List Price: $4,950.00
Condition: CLEANED/CHECKED
Machine Stock Number: 11360
Member Stock Number: SH090011346
Serial Number: AB/18591
DD: D

Description:
6.6 HP motor; 3,000, 4,500, 6,000 8,000, 10,000 RPM spindle speeds via a 5-speed step pulley; 1-1/4" dia. spindle; 5-1/4" capacity under the nut; 5.9" spindle travel; 39" x 25" table; adjustable fence/guard assembly; Complete with: Miter guage slot in table, spindle lock, insert rings in table, manual foot brake and magnetic starter.
Click for Large Image

 
SAC - TS-120 Shaper SINGLE SPINDLE SHAPER
Print Item
List Price: $5,200.00
Condition: LIKE NEW
Machine Stock Number: 55063
Member Stock Number: SH050008155
Serial Number:
DD: D

Description:
9 HP on the spindle

1 1/4" x 6" interchangeable spindle

Electronic Speed Indicator on spindle

Spindle speeds of 3,000-4,500-6,000-8,000-10,000 RPM

Motorized and Digital readout for height adjustment on spindle
Click for Large Image

 
SCM - T-130 SCM SHAPER
Print Item
List Price: $5,250.00
Condition: CLEANED/CHECKED
Machine Stock Number: 1745
Member Stock Number: SH260011292
Serial Number:
DD: D

Description:
1-used SCM model T-130 heavy duty spindle shaper. With 6.6 hp motor, with 1-1/8" spindle, with 4.5" under the nut. With five spindle speeds of 3000, 4500, 6000, 7000, and 10000 rpm. With 28" x 47" table. For operation on 230/60/3. machine is furnished without fence. Machine s/n AB29093, ref# 080425. cleaned and checked.
Click for Large Image

 
SCM - T130E-3 SCM T130E-3
Print Item
2005
List Price: $11,500.00
Condition: LIKE NEW
Machine Stock Number: 10348
Member Stock Number: SH070008431
Serial Number: AB/167413
DD: D

Description:
Used SCM T130E-3 Shaper. 9 HP, 3 PH, 460 volt; 3 axis easy controller for infeed/outfeed fence and spindle position ability to store up to 300 independent programs; 1 1/4" interchangeable spindle, 5 spindle speeds from 3,000 to 10,000 RPM; aluminum fences; Flex: swing support fence with automated control; Fast: sectioned table; reverse rotation switch; led digital readout of spindle height, and infeed/outfeed fence position on controller; mechanical brake; magnetic starter with overload protection; low tension circuit (110V by transformer); tool kit with spare V-belt. 28.1 amps @ 230V, 8 AUG CU THHN wire, 680 CFM x 2 outlets for dust extraction. 230/460V, three phase, currently wired 460V. Year 2005
Click for Large Image

 
LOBO - CS-2045M DOUBLE SPINDLE MITER SHAPER
Print Item
 
2007
List Price: $11,900.00
Condition: AS IS
Machine Stock Number: CS2045-214C
Member Stock Number: SH080010718
Serial Number:
DD: C

Description:
• Fully automatic cycle function, just place the material against the stops, machine will automatic clamp, move in for shaping, come out and release the hold down.
• 6" high stackable spindles with pneumatic up & down and 3 stops are easily and accurately setup for each cutter position.
• Table moves from right to left by variable speed Pneumatic-Hydraulic power to achieve the fully cutting power.
• Twin table moves in and out separated for tongue and groove, end match application
• Twin heavy-duty pneumatic pistons hold down the work pieces to the table.
• Liner guide rails and bearings let the operator move the table smoothly.
• Cast iron fence locks in the table groove to finish 45 degree cuts easily.

SPECIFICATIONS CS-2045M
Max. Cutting Length Unlimited
Max. Cutting Width (45 degree) 9"
Max. Cutting Width (90 Degree) 11"
Max. Cutter Diameter 6" Dia
Spindle Diameter 1-1/4"

Spindle Speed 9000 RPM
Main Motors (2) 5HP each
Dust Hoods (2) 4" dia.
Net Weight 2800 LBS

SN: 270302 new in March, 2007. Wired 230 volts, 3 phase, 30 amps. In very good operating condition.
Click for Large Image

 
AUBURN - End Pro AUBURN END PRO END MATCHER
Print Item
List Price: $14,900.00
Condition: ATFS
Machine Stock Number: 11525
Member Stock Number: SH070009214
Serial Number:
DD: D

Description:
Used Auburn End Pro Type I End Matcher. Single shaper head that produces (2) joints/cycle 8" max. width cap; 3" max. thickness; Equipped with Single vertical spindle, 7.5 HP - 5,000 to 7,000 variable RPM motor powered by AC inverter (reversible rotation) 1-1/4" dia. x 6" long stackable spindle 7-1/2" max. cutting circle with variable control. Spindle traverses in with climb-cut, shifts to the side and traverses out in climb-cut, averages (6) cycles/Min. Includes right & left tables with 3-1/2" individual hand wheel adjustment up and down Complete with automatic spindle brake, horizontal & vertical clamps for both tables. S/N 9804EP67
Click for Large Image

Displaying listings 11 - 20 of 23 possible listings.
1-10 | 11-20 | 21-23