All Listings >  1-10 | 11-17 sort by: best match | lowest to highest | highest to lowest Used National Machine Listings   C.R. ONSRUD - 146C18D Super Duty MACHINING CENTER List Price: $124,500.00 Condition: CLEANED/CHECKED Machine Stock Number: 6383 Member Stock Number: RC170009294 Serial Number: DD: D Description: This “Super Duty Series” machine is equipped with twin tables, a heavy cast iron bridge and cast iron vertical bridge supports, a total work area of 61” X 146” with machining speeds of 3600” per minute. Aluminum tables are 61” X 49” and 61” X 97” and can be operated independently or as one unit. Each table is also equipped with a Nemi precision grid system for use with a large variety of pod configurations. The machine has an HSD 4 pole, 18 HP variable speed spindle for speeds up 24,000 RPM, fully programmable and reversible with HSK-63 tool holder design. The spindle nose has 14” of bridge clearance with11” of Z stroke. All axes on precision linear guide ways with ball screw drives and a central lubrication system. Digital, brushless AC servos, drives and amps and 12 position digital servo automatic rotary tool changer are all standard. Also included is a 9 spindle drill block for drilling up to 5 holes per cycle in either the X or Y axis. The machine is equipped with an OSAI PC Front Series 10/510 system with a high resolution touch screen, networking capability and machine controller-all from OSAI drive package. Provided with 4 port networking hub. OSAI handheld remote job pendant nor the handheld barcode reader is not included but can be retrofitted. All tables include pressure sensitive safety stop bars along the front and rear and entire machine is surrounded by a 360 degree emergency stop cable. Also included is a 40 HP Dekker V-Max liquid ring vacuum pump for 550 CFM at 29” of mercury. The vacuum table also has pneumatic controlled vacuum switches controlled from the touch screen. For a Video of this machine running. click or copy and paste this link into your browser. http://youtu.be/zg3WLJSWSC4 Click for Large Image   SCMI - R 300 Routech PRT MACHINING CENTER List Price: $19,995.00 Condition: AS IS Machine Stock Number: L-1-238 Member Stock Number: RC160009433 Serial Number: DD: C Description: Price Reduced! Was listed at $29,950! CNC Router for Doors - Manufactured Year: 1995 New control in 2002 (OSA, 10/565). As Is, Where Is condition. Buyer responsible for rigging and loading on a truck. New replacement cost is $235,000! • 7.5HP Spindle, single-attachment with manual rotation at 360° • 10HP Spindle, 18,000 RPM with Automatic Tool Changer • the worktable is equipped for handling, positioning, and clamping doors to be machined. It includes: • Feed belts with vertical fold away movement, the belts are fixed on the support devices for the work pieces (mobile and fixed beam); they are made of anti- scratches and anti-scraped material to avoid damages on delicate surfaces • vacuum modules for door clamping • reference stop fixed on the gantry for lengthways door positioning • automatic positioning by program of the mobile beam according to the door length • automatic belt to take away chips and waste material Technical Data Maximum working area, with one operating unit 2,700 mm x 1,700 mm Stroke of axes: X= 2,700 mm Y= 1,700 mm Z+ 1,250 mm Maximum workable dimensions of finished doors 2,400mm x 1,250mm Click for Large Image   THERMWOOD - 40 THERMWOOD MODEL 40 ROUTER 1999 List Price: $35,000.00 Condition: ATFS Machine Stock Number: 10435 Member Stock Number: RC070008456 Serial Number: CYO1960899 DD: D Description: Used Thermwood Model 40 Router 4' x 8'. Engineered Steel Construction Precision track ways and linear bearings AC Servo drives 91000 SuperControl 8 position Rotary Turret Tooling Head 15HP Vac pump windows 2000 Operating system Year 1999 YEAR 1999, ser#C401960899 Click for Large Image   C.R. ONSRUD - C.R. ONSRUD 145G12D USED C.R. ONSRUD 145G12D PANEL PRO CNC ROUTER 2004 List Price: $65,000.00 Condition: CLEANED/CHECKED Machine Stock Number: 11693 Member Stock Number: RC070009502 Serial Number: DD: C Description: Used C R ONSRUD PANEL PRO series. 2004 Year of Mfg Moving Gantry CNC Router with a 145" x 61" worktable; 11" Z-axis stroke; machined table with (1) vacuum zone, cast iron moving gantry bridge and vertical supports. Equipped with: (1) 12.7 HP "HSK-63F" electrospindle, infinitely programmable spindle speeds up to 24,000 RPM, 12-position ATC rotary tool changer; 9-spindle drill block (arranged to drill 5 holes in X- or Y-axis). Closed loop brushless AC Servo motors drive dual rack-n-pion on the moving grantry and precision ball screws on the bridge and vertical axes; 2,000 IPM max. machining speed (straight or contour). All axes ride on extra large precision contour linear guideways, axis travels provide full table coverage for all spindles. Industrial "AMC" machine control system is compatible with virtually all CAD/CAM packages that generate standard M & G codes. Featuring: Simultaneous 3-axis motion, 32-bit RISC processor w/115,000 baud rate download capability; RS-232 port, hand held controller, inch/metric operation, and feed rate & spindle speed override. Comes complete with: (2) Rack mounted 10 HP BECKER Rotarty Vane vacuum pumps and (3) Nemi low profile locator pop up pins. Click for Large Image   LAGUNA - Smartshop 4896 USED LAGUNA SMARTSHOP 4896 CNC ROUTER List Price: $19,900.00 Condition: CLEANED/CHECKED Machine Stock Number: 11666 Member Stock Number: RC070009235 Serial Number: DD: D Description: Used Laguna Smartshop 4896 CNC Router. Industry Control System (Made in USA) Mach Industrial GUI Windows® PC Four (4) linear axes, three (3) horizontal and one (1) vertical Centralized oil lubrication system Gantry width (X) - 50” Gantry Depth (Y) - 100” Vertical (Z) - 9.5” Work Table 50” x 100” Phenolic “Universal” grid-type vacuum table with T-Slot feature Six (6) independent vacuum zones with valves 4.0 HP liquid-cooled standard collet (ER20) Electrospindle, 208-230V, 7.5 HP Regenerative High Volume, Low Pressure vacuum pump, 208-230V, 3 Phase Mach Industrial Windows® Interface Click for Large Image   ROUTECH - RECORD 240 TVN TECNO CNC MACHINING CENTER 2007 Condition: ATFS Machine Stock Number: 10948 Member Stock Number: RC090009549 Serial Number: AA1/015679 DD: C Description: Pod and rail machine with "TVN" tubeless vacuum system (allows maximum flexibility and reduced machining area tooling times; worktable dimensions - 24.15" x 62.99"; X and Y axes stroke - 259.84" x 111.02"; material passage - 14.56"; distance between tool holder and table surface - 22.04"; (1) 3- axis 16 HP Electro-spindle with HSK-63F toolholder; programmable rotation speeds from 900 to 18,000 RPM; liquid cooling with forced circulation supplied with heat exchanger; Rapid 12 tool changer with 12 stations positioned on back of the mobile upright; (1) 16 HP "Prisma K" 5-axis routing unit with HSK-63F tool holder; programmable rotation speeds from 1,500 to 20,000 RPM; C-axis rotation: 640 degrees (-125 degrees/+515 degrees); A-axis rotation: 270 degrees (-50 degrees/+ 220 degrees); liquid cooling with forced circulation supplied with heat exchanger; Rapid 12 tool changer with 12 stations on Prisma K machining head; (7) independent vertical drills (3 in X-axis, 4 in Y-axis); (4) horizontal drills (1+1 in X-axis, 1+1 in Y-axis); 3 HP motor drives drill units; Rapid 24 tool changer with 24 stations place in the rear of the mobile beam with rotary movement; (10) mobile rails with (2) pods per rail to be positioned manually in the Y-axis; motorized conveyor belt for automatic chip removal on right side of machine; LED position indicator on each mobile rail showing the X and Y values corresponding to the workpiece program to be executed; suction cups are manually positioned to these values; each indicator manages the position of up to 4 suction cups per rail; 12 HP 300 m3/h vacuum pump; brushless motors and Yaskawa drives; rapid traverse of X axis - 4,137 IPM; rapid traverse of Y axis - 3,152 IPM; rapid traverse of Z axis - 985 IPM; C-axis rotation speed - 13 RPM; A axis rotation speed - 13 RPM; NUM 1040 numeric control with integrated office PC with XILOG PLUS software interface; Window XP Pro, 15" CRT color display, keyboard, 40 Gb hard disk, 128 Mb RAM memory, 3.5" floppy disk drive, CD-ROM drive, and integrated network card; centralized exhaust system; automatic lubrication system; air conditioned cabinet; safety mats in front plus safety fence around perimeter of rear of machine (capable of pendulum machining); central adjustable reference with 4 stops (2 reference bars complete of 2 stops each - 1 bar for reference on the left hand of operator and 1 bar for reference on the right hand of operator); (4) lifting supports; prearrangement for clamps for pendulum machining; dust deflector. Auto transformer (220V or 440V ready). NOTE: Many aggregates, tooling, and fixtures to be included with this machine! Machine cost new with all tooling was over $400,000.00. Click for Large Image   KOMO - VR 82516 MACHINING CENTER List Price: $0.00 Condition: ATFS Machine Stock Number: 6380 Member Stock Number: RC170009144 Serial Number: DD: D Description: Stock Number 6380 Large envelope moving gantry style CNC Machining center table size allows for a workable 6'in Y x 16' in X, 8" of Z Large rigid design used primarily for cutting aluminum plate Click for Large Image Displaying listings 11 - 17 of 17 possible listings. 1-10 | 11-17